| Joined: | Sun Apr 1st, 2012 |
| Location: | Carthew, Cornwall, United Kingdom |
| Posts: | 6828 |
| Status: |
Offline
|
"Updating from “C†Firmware Versions 1.00 through 1.12 to Version 1.20
You will need to perform the update twice. Performing the update for a second time completes the firmware update.
During the first update, the camera may or may not display the message, “Update failed. Contact a Nikon-authorized service representative.†Continue with the second update regardless.
Performing the Second Update
Complete Steps 4 through 6 of “Updating the Camera Firmwareâ€.
A Note on the Second Update
Note that the firmware version may or may not change as a result of the first update. If the firmware version has changed, the “Current†and “New†versions displayed in the “Update?†dialog will be the same; otherwise, the two versions will be different.
In either case, the firmware version will be updated when you perform the update a second time.
SnapBridge App Unable to Connect
If the SnapBridge app is unable to connect to the camera after the update, you may not have performed the second update.
Select Connect to smart device in the camera SETUP MENU to display the app and camera name; if the Bluetooth icon does not flash in the display, you will need to perform the update again."
Never seen this before where you need to apply an update TWICE to make it complete.
____________________
Still learning after all these years!
https://nikondslr.uk/gallery_view.php?user=2&folderid=none