| Joined: | Sun Apr 1st, 2012 |
| Location: | Carthew, Cornwall, United Kingdom |
| Posts: | 6830 |
| Status: |
Offline
|
Changes from “C†Firmware Version 3.11 to 3.12
• Fixed an issue with firmware versions 3.10 and 3.11 in which fine-tuning values selected for AF fine-tune > Saved value were not correctly applied when pictures were taken.
Changes from Previous Versions
Changes from “C†Firmware Version 3.10 to 3.11
• Fixed an issue that occurred when the camera was used with an MB-N10 battery pack with two batteries installed and an EN-EL15 or EN-EL15a in Chamber A, namely that the camera would sometimes fail to switch to the battery in Chamber B when the battery in Chamber A was exhausted.
Changes from “C†Firmware Version 3.00 to 3.10
• Added support for Nikon Z mount TC-1.4x/TC-2.0x teleconverters.
• Added support for F mount lens firmware updates. F mount lens firmware updates are supported from FTZ mount adapter firmware version 1.10.
• Changed some of the f/-number values displayed when exposure is adjusted in steps of 1/3 EV (f/1.2 is now displayed as f/1.3). As of July 21, 2020, this applies to NIKKOR Z 58mm f/0.95 S Noct lenses.
• The bracketing increment is now properly applied to photos taken with exposure locked during AE bracketing in Continuous H (extended) release mode.
• When an external recorder compliant with Atomos Open protocol is connected, movie recording can now be started and stopped using camera controls if all the following conditions are met:
- The camera is in movie mode and the recorder is connected via HDMI.
- A memory card is inserted.
- The following are selected for HDMI > Advanced in the SETUP MENU:
â–¹ External recording control > On
â–¹ Output data depth > 10 bit
â–¹ N-log setting > Off
- 3840x2160; 30p/25p/24p is selected for Frame size/frame rate in the MOVIE SHOOTING MENU.
• Fixed the following issues:
- The camera monitor would exhibit a green cast when the camera was connected to an external display via HDMI if:
â–¹ Adobe RGB was selected for Color space in the PHOTO SHOOTING MENU,
▹ Shutter-release button > Record movies was selected for Custom Setting g2 (Custom control assignment) in Group “g†(Movie) of the CUSTOM SETTING MENU,
â–¹ 10 bit was selected for HDMI > Advanced > Output data depth in the SETUP MENU,
â–¹ On (cannot record to card) was selected for HDMI > Advanced > N-Log setting in the SETUP MENU,
â–¹ On was selected for HDMI > Advanced > View assist in the SETUP MENU, and
â–¹ movie mode was selected with the photo/movie selector.
- The crop selected for “tall†(portrait-orientation) pictures using PictBridge would not be accurately reflected in the printed image.
- In rare circumstances, autofocus would not engage if a NIKKOR Z DX 16–50mm f/3.5–6.3 VR lens was extended at the same time the camera was turned on.
____________________
Still learning after all these years!
https://nikondslr.uk/gallery_view.php?user=2&folderid=none