| Moderated by: chrisbet, | Page: 1 2 3   |
|
|||||||
| Latest acquisition - D810 - Page 1 | |
| Another repair project | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Aug 23rd, 2025 17:29 |
|
1st Post |
chrisbet
|
Was hunting for an affordable D850 to fix up but even ones with top and front casings smashed were going for best part of £500! But I have just picked up a D810 for £200 - has had the lens mount snapped off but enough of the mirror box front face remains to get a replacement spring and mount correctly aligned. The camera has arrived so I just wait for the spares to turn up. I have black structural methylacrylate glue which will reconstruct the missing parts and secure the mount screws in their holes. If that doesn't work out then I can get a replacement box and have the fun of swapping it all over - full dismantle - I will try and avoid that if I can  Testing with a spare battery shows everything else is OK and it has a 73k shutter count.  Click here to comment on this image.
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Sat Aug 23rd, 2025 17:32 |
|
2nd Post |
jk
|
Hope you can get it back together and working well. Problem is the more pixels the more finicky the set up is. I still have my D810 as backup for my D850 as I got rid of my D600 when I got my Z9.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
||||||||
|
| |||||||||
| Posted: Sun Aug 24th, 2025 03:38 |
|
3rd Post |
novicius
|
What happened,do you know ?
____________________ Back in Danmark I do not use my equipment to make photo`s .. I take photo`s to use my equipment The better I become at photography,the better my camera gets. |
||||||||
|
| |||||||||
| Posted: Sun Aug 24th, 2025 08:48 |
|
4th Post |
chrisbet
|
No, I don't know what happened but the damage indicates that the lens was pulled off in an upward direction - the bottom mount screw hole is intact, the two either side are broken halfway down and the top two are completely missing. There is no damage to the outside of the camera so either it fell on the lens or something fell on it. Either way, all the electronics work and once I get the mount reattached I'll see if the lens communicates with the camera OK. Fortunately Nikon made the box with 8mm deep screw holes for a 6mm screw and the mount is another 1 - 2 mm, so the plan is to use 8mm M2 replacement screws which means, at least for the bottom screws they will screw into unbroken plastic for some of the length. The methylacrylate glue is 2 part and incredibly strong - I use it to glue broken plastic car bumpers back together!
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Tue Aug 26th, 2025 11:34 |
|
5th Post |
Eric
|
chrisbet wrote:No, I don't know what happened but the damage indicates that the lens was pulled off in an upward direction - the bottom mount screw hole is intact, the two either side are broken halfway down and the top two are completely missing. It must have taken a heck of a whack. Or the D600 mount isn’t as robust. I was photographing a leisure centre some years ago. While waiting for the swimming pool to be cleared of people (to get still water) I went up 2 floors to the gym and was taking photos there, when I got the call…. “still water”. I raced down the stone stairwell with my D3 and 24-70 lens loosely wedged on my bag. Centrifugal force took over as I cornered at speed and the whole combo flew across the landing and smashed against the wall. Bits everywhere.  I scooped up the bits put them in the car and grabbed my back up kit only to find some fat git had ignored the request to stay out of water for 10mins and jumped in. Fortunately his ripples hadn’t reached the deep end so I later photoshopped out him and his tsunami. Took the mess to ACS on my way home and having miraculously saved all the bits, David was able to reassemble the lens while I waited. I actually felt it was a better lens after his rebuild! But the point was……the D3 mount was totally undamaged ( ok the body had a couple of chunks missing) …. the lens seemed to be the crumble zone.
____________________ Eric |
||||||||
|
| |||||||||
| Posted: Tue Aug 26th, 2025 12:11 |
|
6th Post |
chrisbet
|
The D810 box is plastic, unlike the D800 / 850 / D3 which are alloy
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Tue Aug 26th, 2025 14:47 |
|
7th Post |
Iain
|
I have bashed and dropped my D3 and D4 and they never flickered and just kept on working. Having never had any dealings with a Z9 I don't know how it would compare in a similar situations.
|
||||||||
|
| |||||||||
| Posted: Thu Aug 28th, 2025 01:39 |
|
8th Post |
novicius
|
I remember Eric`s hair raising D3 / 24-70 encounter with said staircase...remembered it vividly when my own D3S tumbled on the wooden kitchen floor with a 24-70 vr on it,luckily nothing happened ( the floor got dented )....I hope that you can fix it, as it sounds do-able.
____________________ Back in Danmark I do not use my equipment to make photo`s .. I take photo`s to use my equipment The better I become at photography,the better my camera gets. |
||||||||
|
| |||||||||
| Posted: Thu Aug 28th, 2025 13:16 |
|
9th Post |
chrisbet
|
The mount turned up today and is temporarliy fixed for testing - camera working fine with G type lens but fEE with D types - issue on the aperture ring methinks .... But here is a pic taken with my one and only G lens  Click here to comment on this image.
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Thu Aug 28th, 2025 14:37 |
|
10th Post |
Eric
|
chrisbet wrote:The mount turned up today and is temporarliy fixed for testing - camera working fine with G type lens but fEE with D types - issue on the aperture ring methinks .... That looks excellent. Well done. Definitely beyond my skill set. 
____________________ Eric |
||||||||
|
| |||||||||
| This is topic ID = 2042 Current time is 05:27 | Page: 1 2 3 | |
| Nikon DSLR Forums > Camera and Lens Forums > Cameras > Latest acquisition - D810 | Top | |
Users viewing this topic |
||
Current theme is Modern editor
| A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondslr.uk Thank you. |
Hosted by Octarine Services
UltraBB 1.173 Copyright © 2008-2025 Data 1 Systems
Page processed in 0.0623 seconds (66% database + 34% PHP). 82 queries executed.
UltraBB 1.173 Copyright © 2008-2025 Data 1 Systems
Page processed in 0.0623 seconds (66% database + 34% PHP). 82 queries executed.