| Moderated by: chrisbet, |
|
|
| Firmware updates and less is more | Rating: 
|
| Author | Post |
|---|
| Posted by jk: Mon Aug 26th, 2013 08:11 | 1st Post |
| I was just checking my cameras to see if had them all up to date with firmware. I noticed this on the Nikon website................ The following products do not have ANY firmware updates. D2Xs, D50, D60, D70s, D90, D3000, D5000, D5200
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by ttreppa: Mon Aug 26th, 2013 08:22 | 2nd Post |
Looks like they do get it right the first time - sometimes. Terry
____________________ "It's about the photo!" |
| Posted by blackfox: Mon Aug 26th, 2013 12:43 | 3rd Post |
not with the 7100 update after running round like a headless chicken all week and not finding the answer to soft pics on the d7100 a post on flickr from a contact made me realise this is not a ordinary camera with a normal sensor ,he disected one of my pics from yesterday and told me that my shutter speed was way to low for b.i.f ,,i was working on my old formula of focal length plus crop factor equals shutter speed ,i put in a minimum s/s of 1/1600th sec and auto iso 100-4000 and let rip in late evening light .BINGO the first SET of sharp b.i.f shots i have got with the camera .this one below is taken with the 300mm f4 and 1.4 tc ,i will try the new formula on the 1.7 tc tomorrow .PHEW WHAT A RELIEF thats saved a few bob on e/bay fees  test 3 by blackfox wildlife & nature imaging, on Flickr this btw is a huge crop as well so even better
|
| Posted by Gilbert Sandberg: Mon Aug 26th, 2013 15:14 | 4th Post |
| JK, re: I noticed this If I remember correctly, Nikon (in dutch language) even maintain a page to confirm what products can do without (in their opinion) Regards, Gilbert In english this is https://nikoneurope-en.custhelp.com/app/answers/detail/a_id/19609/related/1
|
| Posted by jk: Mon Aug 26th, 2013 17:09 | 5th Post |
Gilbert Sandberg wrote:JK, Yes this is the page that I got the information from. I didnt think it useful to show all the models as many are P'n'S model which are only sold for less than a year and where unless there are gross problems they dont get reported.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by jk: Mon Aug 26th, 2013 17:15 | 6th Post |
blackfox wrote:not with the 7100 I dont know exactly at what MP count it occurs but for my D800 I have found that the minimum shutter speed is (at least) twice that I would use for my D3. So for my D3 I get away with my 300mm by going as slow as 1/200th second. On the D800 even at 1/500th I can see the evidence of shake unless I put the camera on a tripod or monopod.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by Eric: Mon Aug 26th, 2013 18:28 | 7th Post |
jk wrote:blackfox wrote: I never shoot a critter slower than 1/1000th. They twitch even more than me.
____________________ Eric |
| Posted by Robert: Mon Aug 26th, 2013 18:39 | 8th Post |
| It depends on the pixel dimensions. A large pixel will allow shake with an edge line of detail to move within it's boundaries without showing any blur. If you reduce the pixel size by half, i.e. Double the linear count that will mean you either have to reduce the shake by 50% or double the shutter speed. This isn't allowing for variations in inter pixel space, which may also affect the effect of camera shake. Roll on the digital 10" X 8" full frame digital back with 12 MegPixels!!! That should eliminate camera shake. If you can lift it of course...
____________________ Robert. |
| Posted by Eric: Tue Aug 27th, 2013 04:24 | 9th Post |
Robert wrote: It depends on the pixel dimensions. A large pixel will allow shake with an edge line of detail to move within it's boundaries without showing any blur. If you reduce the pixel size by half, i.e. Double the linear count that will mean you either have to reduce the shake by 50% or double the shutter speed.Or just 12 pixels. LOL
____________________ Eric |
| Posted by blackfox: Tue Aug 27th, 2013 06:55 | 10th Post |
| the problem that now arises is ,i know the cause ,i know the effect ,either a high shutter speed and/or VR is needed ,a large heavy expensive lens is out of the question ,is this the reason that nikon have brought out the new 80-400vr and is rumored to be bringing out a new 300mmf4 VR . i for one am not sure whether the higher shutter speed limitations is going to be any use come the winter ,especially given my northerly locale .its a real quandary d300s super camera limited by iso range ,d7100 limited by high shutter speed . anyone got any knitting needles for sale >:(>:(
|
| Posted by Eric: Tue Aug 27th, 2013 10:30 | 11th Post |
blackfox wrote: the problem that now arises is ,i know the cause ,i know the effect ,either a high shutter speed and/or VR is needed ,a large heavy expensive lens is out of the question ,is this the reason that nikon have brought out the new 80-400vr and is rumored to be bringing out a new 300mmf4 VR .Surely the point about the D7100 is that you can use higher ISO than the older D300 and its stablemates and enable the shutter speeds you need? The better crop potential of the extra pixels may also obviate the necessity for the TC, which would gain you another stop. Dont despair Jeff...it will probably snow all winter up there and that will kick some light back onto the bif.
____________________ Eric |
| Posted by blackfox: Tue Aug 27th, 2013 11:42 | 12th Post |
| luckily its a nikon so while you can see the noise in a raw file its easily removed with decent software ,had a little play today (the suns only just come out at 4p.m ) and it looks like the 1.7tc shares the same shutter speed sweet spot of 1/1600th sec. thought i might have to move that one on.i could kick myself really for not realising this earlier but its such a basic problem it passes you by ,and its not showing at shorter focal lengths either .which obviously dulls your response to the real answer. thinking about it now i know the answer its simple really the sensors are made/developed by sony ,ALL there camera bodies have built in image stabilisers as well ,plus most of there latest bodies incorporating these sensors also have mirror less built in as well ,negating any camera shake problems 
|
| This is topic ID = 688 | ||
| Nikon DSLR Forums > Camera and Lens Forums > Cameras > Firmware updates and less is more | Top | |
Users viewing this topic |
||
Current theme is Blue
| A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondsl.uk Thank you. |
Hosted by Octarine Services
UltraBB 1.173 Copyright © 2008-2024 Data 1 Systems
Page processed in 0.0351 seconds (67% database + 33% PHP). 97 queries executed.
UltraBB 1.173 Copyright © 2008-2024 Data 1 Systems
Page processed in 0.0351 seconds (67% database + 33% PHP). 97 queries executed.