Nikon DSLR Forums Home 

This site requires new users to accept that a small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondslr.uk after requesting a new account. Thank you.

 Moderated by: chrisbet,  
AuthorPost
Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
Today I set my D500 to shoot raw to the primary slot and jpeg to the sd card.

Problem, both cards end up with raw on both.

Is it me or is there a problem on the D500 I don't know about?

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
I thought that the Nikon allowed this to work. Certainly does on my Fuji XT2.

Says in manual that it is possible p92.

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
There is jk it's in the menu but set it and all I get is nef on both cards.

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
I think you must have a bug. Do you have latest firmware v1.13 or later as I have v1.13 and it works if I remember correctly.

Might be best to do a Two Green dot reset (factory reset) and try again.

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
I'll give that a try

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
Just tried that and still the same. I'm on 1.14. I might try reinstalling the firmware and see if that helps.

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
Have you tried a hard reset (2 green dots)?

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
jk wrote:
Have you tried a hard reset (2 green dots)? Yes it's still the same.

Graham Whistler



Joined: Fri Apr 13th, 2012
Location: Fareham, United Kingdom
Posts: 1803
Status: 
Offline
On page 96 of D500 Manual it states when NEF-JPG is set on primary XQD slot the NEF only records on prine and the JPG goes on the SD card. Perhaps you need to try this I think it looks as if it will do the job. At lest that's how it reads to me.

I set up both to get full size NEFs so if one slot or card failed I always have back-up. It's a quick easy job to make a JPG of the size you want in post.(Ian sorry if I am doing an egg sucking job to you!!)

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
Graham Whistler wrote:
On page 96 of D500 Manual it states when NEF-JPG is set on primary XQD slot the NEF only records on prine and the JPG goes on the SD card. Perhaps you need to try this I think it looks as if it will do the job. At lest that's how it reads to me.

I set up both to get full size NEFs so if one slot or card failed I always have back-up. It's a quick easy job to make a JPG of the size you want in post.(Ian sorry if I am doing an egg sucking job to you!!)

That's what I've been trying Graham but it records nef to both cards.

Graham Whistler



Joined: Fri Apr 13th, 2012
Location: Fareham, United Kingdom
Posts: 1803
Status: 
Offline
Ian I have just taken D500 camera out and I agree. Best I could do was set Nef+JPG to record on both cards!

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
Just tested this on my D500 with firmware v1.13
It works perfectly for me. NEF saved on XQD slot and JPG to SD.

Settings need to be set to NEF in RAW format.
Then in Slot Selection you choose the Secondary Slot setting to be 3rd option which specifies RAW to XQD and JPG to SD.

Graham Whistler



Joined: Fri Apr 13th, 2012
Location: Fareham, United Kingdom
Posts: 1803
Status: 
Offline
Thanks JK will try that in morning. I also had a go with D850 and had same problem. As I have never needed to do it but we can all learn from each other.

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
Hope it works for you Graham. Should do. :-)

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
Graham Whistler wrote:
Ian I have just taken D500 camera out and I agree. Best I could do was set Nef+JPG to record on both cards! Thats what mine is doing Graham. I think it must have something to do with the firmware as mine is running 1.14

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
There is also a secondary setting you need to make as well.

Settings need to be set to NEF in RAW format.
Then go into "Slot Selection" menu option.
You choose the Secondary Slot setting to be 3rd option which specifies RAW to XQD and JPG to SD.

Iain



Joined: Thu Apr 5th, 2012
Location: Newcastle Upon Tyne, United Kingdom
Posts: 1347
Status: 
Offline
jk wrote:
There is also a secondary setting you need to make as well.

Settings need to be set to NEF in RAW format.
Then go into "Slot Selection" menu option.
You choose the Secondary Slot setting to be 3rd option which specifies RAW to XQD and JPG to SD.

Yep, thats what I have done. Can you reinstall firmware?

jk



Joined: Sun Apr 1st, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6830
Status: 
Offline
No that is only possible at the Nikon Servic Centre by a Nikon technician.

Graham Whistler



Joined: Fri Apr 13th, 2012
Location: Fareham, United Kingdom
Posts: 1803
Status: 
Offline
D500 with 500mm F4 2500 ISO

Attachment: Greenfinch0129.jpg (Downloaded 14 times)


Current theme is Blue



A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondsl.uk Thank you.


Hosted by Octarine Services

UltraBB 1.173 Copyright © 2008-2024 Data 1 Systems
Page processed in 0.1702 seconds (69% database + 31% PHP). 129 queries executed.